Confirmed Black Mold in Cary, NC:
Type III Containment & Removal

Color is not species confirmation. We surface-sample and lab-confirm the species before applying the Type III Stachybotrys protocol. Dark mold in your Cary property may or may not be Stachybotrys — accredited lab analysis answers that question definitively.

Stachybotrys chartarum produces trichothecene mycotoxins that remain biologically active even in dead spore cells. EPA-registered biocides applied to Stachybotrys-contaminated drywall kill the living mold cells on the surface but cannot neutralize the mycotoxin-containing material in the substrate. The drywall itself — now containing both dead mold hyphae and active mycotoxins — remains a potential exposure source. Complete physical removal of contaminated porous materials is the protocol specified by IICRC S520 for confirmed Stachybotrys.

For confirmed Stachybotrys removal, we strongly recommend temporary relocation of occupants — particularly those with respiratory conditions, children, and elderly residents — for the duration of the removal phase and until IH clearance sampling confirms acceptable post-removal conditions. Type III containment significantly limits cross-contamination, but for mycotoxin-producing mold, we consider temporary relocation the conservative and appropriate approach.

Independent IH post-clearance sampling with accredited lab analysis is the only objective confirmation method. Stachybotrys spore counts in the treated zone compared to outdoor baseline — when they're at or below outdoor levels, clearance is confirmed by the IH's written report.

Stachybotrys chartarum requires consistently wet cellulosic material to establish — not just high humidity, but material that has been continuously wet for an extended period. Common sources in Cary, NC properties include: chronic roof leaks that saturate the drywall or insulation below; long-term plumbing leaks inside wall assemblies; slab leaks that maintain wet conditions on floor material above; basement flooding that isn't completely dried within 48–72 hours; and HVAC condensate leaks onto drywall or ceiling tile. Its presence is always evidence of a sustained moisture source, not just a humidity problem.